Step Two
Backwash your pool for up to 2 minutes, then rinse for 20 seconds and return to filter position. |
Step Three
Ensure that your pH and total alkalinity have been checked and adjusted to the prescribed levels i.e. pH 6.8 - 7.4 and alkalinity 80 - 120ppm respectively.
If pH and TA need adjusting apply BLU52 ph Plus or BLU52 pH Minus as directed on the product.
|
Step Four
With the pump set on Filter position, break Booster seal and pour contents into the pool weir. Immediately thereafter break Maintenance 1,2,3, & 4 and pour their entire contents into the pool weir. With pool pump set on Filter position; run continuously until pool clears (usually 1 - 2 days). Do not swim, brush or vacuum until the pool clears (usually 1 to 2 days). Thereafter set pool pump to Waste and manually vacuum resultant residue on the pool floor. |
Step Five
Reconnect pool cleaner and reset pool pump to Filter position. Resume normal weekly treatment after 7 days. |
