PREPARATION PRIOR TO USE BLU52 |
FIRST TIME AND FREQUENT BLU52 USERS:
 |
Backwash swimming pool water for 2 minutes. |
 |
Rinse for 20 seconds and return to Filter position.
|
|
Ensure swimming pool readings PH and TA are maintained and correct
(See chart below).
|
|
TYPE OF
SWMMING POOL |
pH READING PARAMETERS |
TOTAL ALKALINITY READING PARAMETERS |
| Marbelite Pools |
7.0 - 7.4 |
80 - 100 ppm |
Fibreglass or
Painted Pools |
6.8 - 7.2 |
80 - 120ppm |
|
|
If pH and TA need adjusting apply BLU52 pH Plus or BLU52 pH Minus as directed on the product.
|
|
4 WEEK MAINTENANCE INSTRUCTIONS |
 
WEEK 1
- Backwash swimming pool for 2 minutes.
- Rinse for 20 seconds and return to Filter position.
- Adjust pH and TA readings as required.
- Break Booster seal at
 above with blunt object and sprinkle contents directly into pool weir.
- Break Maintenance 1 seal at
 above and sprinkle contents into pool weir.
WEEK 2
- Backwash swimming pool for 2 minutes.
- Rinse for 20 seconds and return to Filter position.
- Adjust pH and TA readings as required.
- Break Maintenance 2 seal at
 above and sprinkle contents into pool weir.
WEEK 3 & 4
- Follow WEEK 2 instructions, breaking Maintenance 3 & 4 seals at
 &  respectively.
|
BLU52 Customer Care Line:
0860 456 6245
FOR SHOCK TREATMENT CLICK HERE
|
